Beko DBKE386XI+, Instructions For Use Manual

Page: 29 / 32

GB
Instruction for use
Before requesting service, please check if the
malfunction has been caused by an operating
error. If this is the case, and a service has
been requested, a service charge will be
levied even if the device is still under
guarantee.
If the problem persists please contact your
dealer or customer service.
Please have the type and serial number of
your device when calling. The rating label is
located inside.
Door Open Alarm
There is a built in buzzer in the appliance that
will inform customer if the fridge door is left
open for a minute. This alarm is a periodic
alarm and it reminds the customer that the
fridge door is left open.
There is no buzzer alarm related to freezer
door.
In order to stop the door open alarm, it is
enough to press any button on the display or
close the door. Thus the alarm will stop till
next time.
Reversing the doors
The door of your refrigerator is designed to
operate towards both sides at your
convenience. If you want the door to open
towards the other side, please call the nearest
authorized maintenance service for
assistance.
Information concerning the noise and the
vibrations which might appear during the
operation of the appliance
4. Noise similar to the tick of an analogical
clock.
‐
This noise comes from the solenoid valve
with which the refrigerating appliance is
endowed. The solenoid valve is a component
of the refrigerating appliance which provides
the passage and the distribution of the
refrigerant between the two compartments of
the appliance according to the adjustment of
the temperatures. This noise is normal, it is
not a defect.
22
1. The operation noise can increase during
the operation.
‐
In order to keep the temperatures at the
adjusted temperatures, the compressor of the
appliance starts periodically. The noise
produced by the compressor becomes
stronger when it starts and a click can be
heard when it stops.
‐
The performance and operation features of
the appliance can change according to the
modifications of the temperature of the
ambient environment. They must be
considered as normal.
2. Noises like liquids flowing or as being
sprayed
‐
These noises are caused by the flow of the
refrigerant in the circuit of the appliance and
comply with the operation principle of the
appliance.
3. Other vibrations and noises.
‐
The level of noise and vibrations can be
caused by the type and the aspect of the floor
on which the appliance is placed. Make sure
that the floor does not have significant level
distortions or if it can yield to the weight of the
appliance (it is flexible).
‐
Another source of noise and vibrations is
represented by the objects placed on the
appliance. These objects must be removed
from the appliance
‐
The bottles and the vessels placed in the
refrigerator touching each other. In such
cases move the bottles and the vessels so
that there is a small distance between them.