Beko DB 7101 PA, User Manual, Page: 19 / 48

Dryer / User Manual EN 19 / 48
EN
Programme table
Programmes Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate amount of
remaining humidity
Drying time (minutes)
Cottons / Coloreds
A
Cupboard dry
7
1000 % 60 121
800 % 70 140
3.5
1000 % 60 70
800 % 70 85
A
Iron dry
7
1000 % 60 100
800 % 70 121
3.5
1000 % 60 50
800 % 70 50-70
Synthetics
B
Cupboard dry 3.5
800 % 40 50
600 % 50 70
Energy consumption values
Programs Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate amount of
remaining humidity
Energy consumption value
kWh
Cottons cupboard dry 7 1000 % 60 4,22
Cottons iron dry 7 1000 % 60 3,40
Synthetics cupboard dry 3.5 800 % 40 1,60
Power consumption of the off-mode for the standart cotton programme at full load, PO (W)
0,3
Power consumption of the left-on mode for the standart cotton programme at full load, PL (W)
1,0
5.6 Auxiliary function
Low temperature
This function allows for drying at lower temperatures
and therefore saves energy.
Warning LED will light up when you select the function.
C
You must use this function when you dry
your synthetic or delicate laundry.
5.7 Warning indicators
C
Warning indicators may differ according to
the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter cleaning after
the programme finishes.
C
If the filter cleaning warning light lights up
continuously, please refer to, “Suggested
solutions for problems”.
Water tank
Warning LED will light up at the end of the programme
or when the tank is full with water. The machine stops
operating when this warning LED lights up during a
programme running. To restart the machine, please
drain the water in the water tank. Press “Start/Pause/
Cancel” button to start the programme after you have
emptied the water tank. The warning LED goes off and
the programme resumes operating.
5.8 Starting the programme
1. Press “Start/Pause/Cancel” button to start the
programme.
2. Light of the “Start/Pause/Cancel” button will turn on
to indicate that the programme has started.
Timer follow-up indicator
One of the LEDs is on as far as programme runs and
shows the approximate remaining time.
5.9 Changing the programme after
the programme has started
You can use this feature to dry your laundry in a
different programme after your machine has started to
run.
For example;
Press and hold the “Start/Pause/Cancel” button for
about 3 seconds to select “90” minutes programme
instead of “60” minutes program.
Select the “90” minutes programme by rotating the
program knob.
Press “Start/Pause/Cancel” button to start the
programme.
C
The program which is selected first will go
on even if the programme selection button
is moved and another programme mode is
selected while the machine is operating.
You must cancel the ongoing programme
in order to change the drying programme.
(See, Ending the programme through
canceling)
Adding/removing laundry in standby mode
In order to add or take out laundry after the start-up of
the programme;
1. Press the “Start/Pause/Cancel” button to switch the
machine to “Pause” mode. Drying process will stop.
2. Open the door at Pause position and close it again
after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start the
programme.
C
Any laundry added after the drying
process was started may cause the
already dried clothes in the machine
intermingle with wet clothes and the
result will be wet laundry after the drying
process is over.