background image

30 - EN

It continuously washes. Remaining time does not count down.

In the case of a paused countdown 

while taking in water:

- Timer will not countdown until the 

machine is filled with the correct 

amount of water. (On models with 

display)

- Time might have gotten stuck during 

heating step. (On models with display)

In the case of a paused countdown at 

the spinning step:

There may be an imbalance of laundry 

in the machine. (On models with 

display)

- The machine will wait until there is sufficient 

amount of water to avoid poor washing results due 

to lack of water. Then the timer will start to count 

down.

- Time will not count down until the selected 

temperature for the programme is attained.

- The automatic spin correction system might have 

been activated due to the unbalanced distribution 

of the laundry in the drum.

- The laundry in the drum may be clustered 

(bundled laundry in a bag). Laundry should be 

rearranged and re-spun.

- No spinning is performed when the laundry is 

not evenly distributed in the drum to prevent any 

damage to the machine and to its environment.

It did not spin.

- There may be an imbalance of 

laundry in the machine. Therefore, 

the programme might have been 

completed without spinning.

- The machine will not spin if the water 

has not completely drained.

- The automatic spin correction system might have 

been activated due to the unbalanced distribution 

of the laundry in the drum.

- The laundry in the drum may be clustered 

(bundled laundry in a bag). Laundry should be 

rearranged and re-spun.

- No spinning is performed when the laundry is 

not evenly distributed in the drum to prevent any 

damage to the machine and to its environment.

 - Check the filter.

 - Check the drain hose.

Washing performance is poor: Laundry turns grey

 - Using insufficient amount of 

detergent for a long time,

 - Washing at low temperatures for a 

long time,

 - Using insufficient amount of 

detergent for hard waters (soil can stick 

to the laundry),

 - Using excessive amount of detergent 

(detergent can stick to the laundry).

 - Use the recommended amount of detergent 

appropriate for water hardness and the laundry.

 - Select the proper temperature for the laundry to 

be washed.

 - If the water hardness is high, using an insufficient 

amount of detergent can cause laundry to turn 

grey over time.

 - It is difficult to eliminate such greyness once it 

occurs.

Washing performance is poor: Stain could not be removed, not cleaned. Laundry could not 

be whitened.

- Insufficient amount of detergent used.

- Excessive laundry loaded into 

machine

- Wrong programme and temperature 

might have been selected.

- Improper detergent may have been 

used.

- Wrong type of detergent used.

- Use recommended amount of detergent 

appropriate for the laundry.

- Do not load the machine in excess.

- Select the proper programme and temperature 

for the laundry to be washed.

- Put the detergent in the correct compartment.

- Do not mix detergent with bleaching agents.

Summary of Contents for D2 8101 E


































Reviews: