8 / 13 EN
3
Set-up
•
Observe the dimensions given in Figure 1 and
drill 4 Ø 8 mm holes for X and Y and 4 Ø 6 mm
holes for Z and H.
•
Use the screws and dowels in the equipment of
the appliance for installation of various parts.)
•
Secure the bracket (Figure 2-3) to the Z and H
holes on the wall.
Place the screws to the Z holes so that a clearance
of 8 mm is left. (Figure 3)
After hanging the hood to the Y holes, secure it to
the wall using X holes inside the body. Tighten Y
screws. (Figure 4)
Hood / User Manual
Summary of Contents for CWB 6601 X
Page 1: ...CWB 6601 X Hood User Manual ...
Page 18: ......
