Beko CSM 63320 DSL, Service Manual

Page: 50 / 130

50
Sensitivity: Public
1. PTC (Temperature Sensor) socket
2. Door switch socket
3. Display connection socket
4. Safety Relay (heaters neutral connection switches)
5. Low-power components (fan, lamp, chicken roasting engine) connection socket
6. Card SMPS circuit (12V: 5V Relay for riding: for the processor and screen supply)
7. High-strength components (heaters) connection sockets
Fonctıon
• heaters on the oven, fan and lamp components such as control via relays.
• Provides a view of the formation of the screen for the user interface.
• by detecting the user's pressing the button allows changing the settings.
• the PTC (Temperature Sensor) by reading the data from the temperature constant, and
helps to keep the temperature constant inside the oven
• counting the frequency of the network signal, enables the progress of the digital clock.
• ensuring that the same time max 2 heater circuit ensures 3600W power to withdraw from
more than one phase. (3 units a function of the heater is operating, the heater is operated
intermittently.)
Properties

Supply Voltage : 220-240V AC 5060Hz-60Hz

SMPS : 12V ve 5V çıkışlı. Max 4W
Max Operating Temperature
: 85°C
Grid Resistance
Oven Heatıng
Clemens
Turbo Motor
With the control button which allows you
to act and electric ovens, grill and
thermostat resistor .. is controlled by the
control button under the commutator.
Which is controlled by the control button
under the commutator and electric oven
thermostat at the desired temperature
resistor that allows cooking in the oven. Of
the lower plate and the base chassis
ground at the bottom of the oven is
located.