Beko CSF5250M00W, User Manual

Page: 45 / 52

45 / EN
Refrigerator / User manual
Product life extends if it is cleaned
regularly
B
WARNING: Cut off power before
cleaning your refrigerator.
•
Do not use sharp and abrasive tools,
soap, house cleaning materials,
detergents, gas, gasoline, varnish and
similar substances for cleaning.
•
Melt a teaspoonful of carbonate in the
water. Moisten a piece of cloth in the
water and wring out. Wipe the device
with this cloth and dry off thoroughly.
•
Take care to keep water away from the
lamp’s cover and other electrical parts.
•
Clean the door with a damp cloth.
Remove all contents to remove the
door and body racks. Remove the door
racks by lifting them upwards. Clean
and dry the shelves, then attach back in
place by sliding from above.
•
Do not use chloric water or cleaning
products on the exterior surface and
chrome-coated parts of the product.
Chlorine causes rust in such metal
surfaces.
6.1. Preventing malodour
The product is manufactured free of any
odorous materials. However, keeping
the food in inappropriate sections and
improper cleaning of internal surfaces
may lead to malodour.
To avoid this, clean the inside with
carbonated water every 15 days.
•
Keep the foods in sealed holders.
Micro-organisms may spread out
of unsealed food items and cause
malodour.
•
Do not keep expired and spoilt foods
in the refrigerator.
C
Tea is one of the best known
odour-removers.
Place the pulp of the brewed tea
in the product inside an open
container and remove it after 12
hours at the latest. If you keep
the tea pulp inside the product
for longer than 12 hours, it
will collect the organisms that
cause the odour so it can be the
source of odour itself.
6.2. Protecting plastic surfaces
Oil spilled on plastic surfaces may
damage the surface and must be
cleaned immediately with warm water.
6.3. Door glass
For routine cleaning works, it is
recommended to use water-based
cleaning products that are non-alkali
and non-abrasive.
In order to increase the durability of
this glass against impact and breaking,
it has gone through a tempering
process.
6 Maintenance and cleaning