Beko CRNG4601DV, User Instructions

Page: 8 / 28

4. Refer to cleaning and care section to prepare your appliance for use.
5. A special receptacle is supplied to store the mains plug during transit.
The receptacle is fixed at the back of the cabinet,
on the side of the compressor (see diagram).
Gently remove the plug from the receptacle.
Never pull the mains cord, you may
damage the appliance. In the case of
transportation, ensure you locate the plug in
the receptacle provided to avoid transit
damage.
6 . If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction of
black arrow and raised when you turn in the
opposite direction. Taking help from someone
to slightly lift the refrigerator will facilitate this process.
Changing the illumination Lamp
To change the Bulb/LED used for illumination of your refrigerator, call your Authorized
Service.
The lamp(s) used in this appliance is not suitable for household room illumination. The
intended purpose of this lamp is to assist the user to place foodstuffs in the
refrigerator/freezer in a safe and comfortable way.
The lamps used in this appliance have to withstand extreme physical conditions such as
temperatures below -20°C.
Changing the door opening Direction
Door opening direction of your refrigerator can be changed according to the place you
are using it. If this is necessary, please call your nearest Authorized Service.
6
From Cookers
From Radiators
From Refrigerators or Larder Fridge
2" (50 mm)
12" (300 mm)
1" (25 mm)
INSTALLATION INSTRUCTIONS
1.
The space in the room where the appliance is installed must not be smaller than 10
cubic metres.
2. If the ambient temperature is below 0°C, the food in the fridge compartment will
freeze. So, we recommend you don't use the fridge compartment in such low ambient
conditions.
You can continue using the freezer compartment as usual.
3. Do not place the appliance near cookers, radiators or in direct sunlight as this will
cause your appliance to work harder. If installed next to a source of heat or freezer,
maintain the following minimum side clearances: