8 / 59 EN
Range Hood / User Manual
3
3.1 List of Materials
3.1.1 Parts supplied
Removing the packaging
Remove carton carefully, Wear
gloves to protect against sharp
edges.
WARNING:
Remove the protec-
tive covering the product before
putting into operation.
•
Hood canopy.
•
Blower.
•
Duct transition.
•
Lamp already installed.
•
Gr
ter.
•
Hardware bag with:
–
Use, care and installation guide
–
2 hollow wall anchors with 2 screws to
secure hood to the wall at the bottom
–
4 Wood screws to secure the wood support
to the wall
–
4 Phillips head screws to secure the transition
to the hood outlet on the top
–
6 Phillips head screws to secure hood to the
cabinet
–
2 Safety screws and 2 lock washers to secure
the blower
–
2 Flat washers for hollow wall anchors
–
Torx 20 adapter
3.1.2 Parts not supplied
Tools/Materials required
•
Wire nuts
•
10” rounded metal duct length to suit installation
•
Measuring tape
•
Pliers
•
Gloves
•
Knife
•
Safety glasses
•
Electric drill with 5/16” and 3/8” Bits
•
Strain relief
•
Spirit level
•
Duct tape
•
Screwdrivers:
–
Phillips (Posidrive) # 2
–
Torx # 2
•
Wire cutter/stripper
•
Masking tape
•
Hammer
•
Saw, jig saw or reciprocating saw
ducted out only
30" -
500
CFM
36" - 910 CFM
Nr.of Speeds
4
Controls
2 x 6.5 W LED
Volts
120 V
Frequency
60 Hz
Total Power
(motor + lamps)
30" - 450 W
36" - 900 W
Plug type
-
tance above
cooktop
30” (gas cooktop)
Summary of Contents for CHP 30100 CF
Page 60: ...www beko com ...
