EN
19
Using the water dispenser
* May not be available in all
models
C
It is normal for the first few
glasses of water taken from
the dispenser to be warm.
C
If the water dispenser is
not used for a long period
of time, dispose of first few
glasses of water to obtain
fresh water.
1. Push in the lever of the water
dispenser with your glass. If you are
using a soft plastic cup, pushing the
lever with your hand will be easier.
2. After filling the cup up to the level
you want, release the lever.
C
Please note, how much
water flows from the
dispenser depends on how
far you depress the lever. As
the level of water in your cup
/ glass rises, gently reduce
the amount of pressure on
the lever to avoid overflow.
If you slightly press the
arm, the water will drip; this
is quite normal and not a
failure.
Filling the water dispenser's
tank
Water tank filling reservoir is located
inside the door rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
C
Do not fill the water tank
with any other liquid except
for water such as fruit juices,
carbonated beverages or
alcoholic drinks which are
not suitable to use in the
water dispenser. Water
dispenser will be irreparably
damaged if these kinds of
liquids are used. Warranty
does not cover such usages.
Some chemical substances
and additives contained in
these kinds of drinks/liquids
may damage the water tank.
C
Use clean drinking water
only.
C
Capacity of the water tank
is 3 litres; do not overfill.