Cooker Hood / User Manual
8 / 15 EN
1
Important instructions for safety and environment
General
Carefully read the following impor-
tant information regarding installa-
tion safety and maintenance. Keep
this information booklet accessible
for future reference. The appli-
ance has been designed for use in
the ducting version (air exhaust to
the outside - Fig.1B), filtering ver-
sion (air circulation on the inside
- Fig.1A) or with external motor
(Fig.1C).
Safety precaution
•
Take care when the cooker hood
is operating simultaneously with
an open fireplace or burner that
depend on the air in the environ-
ment and are supplied by other
than electrical energy, as the
cooker hood removes the air from
the environment which a burner
or fireplace need for combustion.
The negative pressure in the en-
vironment must not exceed 4Pa
(4x10-5 bar). Provide adequate
ventilation in the environment for
a safe operation of the cooker
hood.
Follow the local laws applicable
for external air evacuation.
Before connecting the model to
the electricity supply network:
•
Check the data plate (positioned
inside the appliance) to ensure
that the voltage and power cor-
respond to the network and the
socket is suitable. If in doubt ask
a qualified electrician.
•
If the power supply cable is dam-
aged, it must be replaced with
another cable or a special assem-
bly, which may be obtained direct
from the manufacturer or from the
Technical Assistance Centre.
•
This device must be connected to
the supply network through either
a plug fused at 3A or hardwired to
a single phase spur protected by
3A fuse.
A
In certain circumstances
electrical appliances may
be a danger hazard.
•
Do not check the status of the fil-
ters while the cooker hood is op-
erating.
•
Do not touch bulbs or adjacent
areas, during or straight after pro-
longed use of the lighting instal-
lation.
•
Flambè cooking is prohibited un-
derneath the cooker hood.
