Beko BRH60CX, User Manual, Page: 12 / 20

12 / EN Hood / User Manual
4
Installing your appliance
Before installation, the following must be done:
•
Check that the dimensions of the purchased
product are adapted to the selected target spot.
•
Disconnect and remove (if possible) the
furniture located in the installation area of the
hood to get easy access to the ceiling or wall
to which the hood is to be fitted. If this is not
possible, the elements located near the working
area must be secured.
•
Verify if there is a plug socket close to the hood
installation area and if it is possible to connect
the hood to the vent pipe evacuating the vapors
outside.
•
Verify if the drilling spots do not cover
installation wires (electrical, hydraulic, etc.).
•
Be equipped with the following tools: measuring
tape, pencil, drill/ driver, drill Ø8, screwdriver,
bubble level.
4.1 Installation works
A
The installation must be carried out
very carefully, so as not to scratch
the chimney cover and the hood.
A
B
C
D
E
F
[ Ø 6 x 30mm] x8
[4 x 32mm] x8
[4 x 12mm] x4