Microwave Oven / User Manual
11 / EN
2.3 Installing the turntable
•
Never place the glass tray upside down. The
glass tray should never be restricted.
•
Both glass tray and turntable support must al-
ways be used during cooking.
•
All food and containers of food must always
place on the glass tray for cooking.
•
If glass tray or turntable support crack or break,
contact your nearest authorized service center.
2 Your microwave oven
Göbek (alt kısım)
Cam tabla
Döner tabla desteği
Döner tabla mili
Hub (underside)
Glass tray
Turntable shaft
Turntable support
3 Installation and connection
3.1 Installation and
connection
•
Remove all packing material and accessories.
Examine the oven for any damage such as dents
or broken door. Do not install if oven is damaged.
•
Remove any protective film found on the micro-
wave oven cabinet surface.
•
Do not remove the light brown Mica cover that
is attached to the oven cavity to protect the
magnetron.
•
Select a flat surface that provides sufficient
space for inlet and outlet ducts.
20cm
30cm
20cm
min85cm
20cm
•
Minimum installation height is 85 cm.
•
Rear surface of the appliance should not be
placed against a wall. Leave a clearance of min.
30 cm above the oven; the minimum distance
between the oven and adjacent walls, if any,
should be 20 cm.
•
Do not remove the spacers beneath the oven.
•
Obstructing the inlet and outlet openings may
damage the oven.
•
The appliance is fitted with a plug and must only
be connected to a properly installed grounded
socket.
•
The mains voltage must correspond to the vol-
tage specified on the rating plate.
•
If the plug is no longer accessible after instal-
lation, an all-pole isolating switch must be pre-
sent on the installation side with a contact gap
of at least 3 mm.
•
Adapters, multi-way sockets and extension
cords must not be used. Overloading can result
with a risk of fire.
A
WARNING:
Do not place the oven
onto a hob or any other appliance
that emits heat. Placing the oven
on or close to a heat resource may
damage the oven and consequently,
the warranty will become void.