Beko BKS 2422, User Manual

Page: 3 / 15

1
Technical Aspects of your machine
Suction inlet
Spare paper filter lid
Dust lid
Dust bag full light indicator
On-off button
Cord winder button
Supply cord
Suction inlet hose adapter
Hose
Cleaning handle
Telescopic tube
Adjustable floor brush for
hard floors and carpet
Crevice tool
Adjustment bolt
Power regulator knob
2
3
4
Net weight : 6.15 kg.
Adapter Voltage / Frequency : 220-240V~ 50/60 Hz
Adapter Isolation Class :
Dimensions
: ø 405 x 325 x 245 mm.
Maximum power : 2200 W max.
Nominal power : 1900 W nominal
Using your machine
5
6
7
8
9
10
11
12
13
All declared values on the product and on the printed
leaflets are picked up after laboratory measurements
performed according to related standarts. These values
may differ upon usage and ambient conditions.
3 4
9
10
13
8
2
4 5 6 7
3 1
1) Preparing the vacuum cleaner
for use:
Press the key on suction inlet hose
adapter (Picture 1), and fit the hose
holding piece into the suction inlet.
Pull the cord out and plug it in the electric
socket (Picture 2).
Attention!
Do not pull out longer than the red
indicator on the cord.
2) Using the telescopic tube:
The tubes are telescoped and the length
can be adjustable. By pressing the
adjustment bolt forward, adjust the length
of the tube for your convenience (Picture
3). When you release the adjustment
bolt, the tube will remain fixed at its place.
Fix the accesory that you want to use at
the end of the telescopic pipe.
Fix the accesory that you will select
according to the surface you will clean
at the end of the telescopic tube (Pictures
4,5).
3) Using the accesories:
The crevice tool is used
to clean places which are narrow and
difficult to reach.
The use of the brush for carpets and
hard surfaces: There is an adjusting
mechanism on the left side of the brush,
which indicates a positioning for carpets
and for hard surfaces. This mechanism
is adjusted according to the surface to
be cleaned. To clean your carpets and
kilims, use the brush in the normal
position (the bristle-brushes in a hidden
position). To clean hard surfaces such
as wooden or vinyl, or flat surfaces such
as the walls, change the adjustment
positioning and do the cleaning on the
bristle brushes.
(Picture 1) (Picture 2)
(Picture 4)
(Picture 5)
(Picture 3)
adjusting
bolt
14
11
14
12
The power values were tested at 240 V.
15
15