20 / 48 EN
Steam Iron Station / User Manual
4 3 Steam ironing
1. Place the appliance on an even, dry
and nonslip surface. The non-slip
feet “22” ensure the stability of the
appliance.
2. Fill the water tank as described
in the section “Filling in the water
tank”.
3. Insert the power plug “7” into the
wall socket.
4. Push the On/Off switch “20” to
switch on the steam ironing station.
– The power indicator “14” lights
up red and the ECO indicator
light “17” illuminates green.
5. Adjust the temperature control dial
“12” to the desired temperature.
– The temperature indicator light
“3” lights up yellow. The yellow
temperature indicator light “3”
remains on while the iron is
heating up. As soon as the iron
reaches the set temperature, the
temperature indicator light goes
off. The temperature indicator
light will go on and off during
usage to indicate that the set
temperature is being regulated.
C
Steam ironing is only
possible at higher
temperature settings
between •• and MAX.
6. The water in the water tank heats
up within 3 minutes. As soon as the
temperature indicator light goes off
and the control indicator in “3” the
steam button remains lit, the steam
iron is ready to use. Hold the iron in
horizontal position on the garments
and press the steam jet button “13”
Continue to move the iron when
ironing.
A
WARNING:
Never
direct the steam at
people or pets.
C
When the steam iron-
ing station is switched
on it will produce a
‘pumping’ sound. This
is normal and indicates
that water is being
pumped from the water
tank into the steam iron-
ing station.
7. Set the desired steam pressure
ECO, MEDIUM or HIGH by using the
steam adjusting button
“21”.
– The corresponding control indica-
tor in the steam button blinks
as soon as it is selected. After
approx. 2 minutes the control
indicatorm will remain lit, indicat-
ing that the appliance is ready
for steam ironing.
4
Operating the product
