Beko BK 7725, User Manual

Page: 7 / 24

Minibar / User Manual 7 / 20 EN
3 Use
3.1 Intended use
Appliance is intended for household use and
stores, personnel kitchens in offices and other
work environments; use by customers of farm
houses and hotels and other accommodation type
environments; hostel type places; food and bever-
age services and similar non-retail applications.
3.2 Position of appliance
•
When determining a location for your appliance
make sure that the floor is level and strong.
•
It should be a well ventilated location and the
average room temperature should be between
16oC and 38oC.
•
Do not place the appliance near heat sources
such as oven, water heater or central heating.
Do not place the product in places subject to di-
rect sunlight like annex or sunroom.
•
If you place the appliance in outdoor locations
like a garage or annex, place the appliance
above the damp course, otherwise there may
be condensation in the appliance.
•
Never place and operate the appliance in built-
in walls or in any cabinet or furniture designed
for the appliance. Rear grill and sides of cabinet
may heat up.
•
Place it in a way that back of the appliance is
9 cm (31/2") and sides of the appliance is 6 cm
(3/4") away from wall. Do not use anything to
cover the appliance.
•
If two Coolers are to be installed side by side,
there should be at least 4 cm distance between
them.
3.2.1 Alignment of appliance
When appliance doesn't stand even, alignment
of the door and the magnetic seal is affected and
this prevents the appliance from operating prop-
erly. When placed in its location, align the appli-
ance by rotating the adjustable front legs.
3.3 Initial use
•
Wipe the internal surface of the appliance with
diluted sodium bicarbonate solution. Then rinse
with warm water using a sponge or cloth. Wash
the baskets and shelves with soapy water and
allow them dry completely before placing back
in appliance. External parts of the appliance can
be cleaned with wax polish.
•
Make sure that there is a socket appropriate for
the plug supplied with your appliance.
A
WARNING: Do not activate the
appliance sooner than 4 hours after
it was moved.
•
It takes time for cooler fluid to be settled. If you
turn off the appliance, wait for 30 minutes to
reactivate it. This period of time is necessary for
cooler fluid to be settled.
•
Before placing food into the appliance, activate
the appliance and wait for 24 hours. This period
of time is necessary for appliance to operate
properly and reach the right temperature.
•
Clean the appliance parts with warm water con-
taining some neutral detergent and then wipe
it dry.
A
WARNING: Electric parts of the
appliance should only be wiped with
dry cloth.
3.4 Operation
1. Turn the thermostat knob to the "4" position,
turn on electricity. Compressor starts to oper-
ate.
2. Open the door 30 minutes later. If the tempera-
ture in appliance is declined prominently, this
means appliance system is operating properly.
When the appliance is operated for a while,
heat control system will automatically adjust
the temperature within the allowed limits.