Beko BFFD3626SS, User Manual, Page: 14 / 97

14 319 EN
Refrigerator / User Manual
Installation
B
WARNING:
Damaged power cable must
be replaced by the Authorized Service
Agents.
B
WARNING:
If the product has a failure, it
should not be operated unless it is repaired
by the Authorized Service Agent! There is
the risk of electric shock!
4.5 *Adjusting the feet
After moving the refrigerator into place, we
recommend lowering the feet to secure the
QSPEVDUJOQMBDF:PVDBOBMTPBEKVTUUIFGFFU
if the product is not balanced. Twist the feet in
the desired direction according to the illustration
below. Adjusting the feet can also be used to align
the doors.
4.3 Installing the plastic wedges
Plastic wedges supplied with the product are
used to create the distance for the air circulation
between the product and the rear wall.
1.
To install the wedges, remove the screws on the
product and use the screws supplied together with the
wedges.
2. Insert the 2 plastic wedges onto the rear ventilation
cover as illustrated in the figure.
4.4 Electrical connection
t
120VAC, 60Hz, Dedicated 15Amp
Circuit.
t('$*PVUMFUTXJMMQSPWJEFBEEFEQSPUFDUJPO
but any failure of the GFCI could cause
food spoilage, which is not covered by the
manufacturer’s warranty.
t&MFDUSJDBMDPOOFDUJPONVTUDPNQMZXJUIOBUJPOBM
regulations.
t1PXFSDBCMFQMVHNVTUCFXJUIJOFBTZSFBDI
after installation.
t%POPUNBLFDPOOFDUJPOTWJBFYUFOTJPODBCMFT
or multi-plugs.
To adjust the doors vertically,
Loosen the fixing nut located at the bottom.
Rotate the adjusting nut according to the position
of the door (clockwise/counter-clockwise).
Tighten the fixing nut in order to fix the position.
To adjust the doors horizontally,
Loosen the fixing nut located at the top.