Beko BEKOMAT 16 CO, Original Installation And Operation Manual

Page: 14 / 60

4. Technical data
4.1 Operating parameters
BEKOMAT
®
16 CO
Min. / max. operating pressure
0.8 ... 16 bar(g)
12 ... 230 psi(g)
Min./max. operating temperature
+1 … +60 °C
+34 … +140 °F
Min./max. ambient temperature:
+1 … +60 °C
+34 … +140 °F
Min./max. ambient air humidity 10 … 80 %, non-condensing
Condensate inlet
2 x G3/4 (internal thread) + 1 x G1 (internal thread)
2 x 3/4" NPT (internal thread) + 1 x 1" NPT (internal thread)
Condensate discharge G1/2 (internal thread)
Media Condensate, oil-contaminated and oil-free
Empty weight
5.90 kg
13.0 lbs
Operating voltage
230 / 115 /… / 24 VAC ± 10%, 50 … 60 Hz / 24 VDC ± 10%
See type plate
Power consumption P < 8.0 VA (W)
Fuse protection recommended for AC: 1 A (time-lag) | prescribed for DC: 1 A (time-lag)
Recommended cable diameter
5.8 ... 8.5 mm
0.23 … 0.34 inch
Recommended wire cross-section
(voltage supply)
3 x 0.75 … 1.5 mm²
AWG 16 ... 18
Recommended shortening of the
cable jacket
PE= ~ 60 mm
~ 2.3 inch
L|N= ~ 50 mm
~ 1.96 inch
Recommended stripping length of
the cable wires
~ 6 mm
~ 0.24 inch
Connection data potential-free
contact for switching load
AC: max. 250 V / 1A | DC: max. 30 V / 1A
Degree of protection IP65 / NEMA 13
Overvoltage category II
Degree of pollution 3
BEKOMAT
®
16 CO Original installation and operation manual
14 | 60