background image

45/EN

Guarantee

BEKO UK AND IRELAND STANDARD MANUFACTURER GUARANTEE 

TERMS AND CONDITIONS

Your new Beko product is guaranteed against faulty materials, defective components or 

manufacturing defects. 

The standard guarantee starts from the date of original purchase of the 

product, and lasts for a period of twelve (12) months unless Beko plc (the 

“Manufacturer”) agrees to extend the guarantee for the product in writing. 

If you have purchased an American style Fridge freezer, the standard 

guarantee starts from the date of original purchase of the product, 

and lasts for a period of twenty four (24) months unless Beko plc (the 

“Manufacturer”) agrees to extend the guarantee for the product in writing. 

If you have any questions about the guarantee on your product (including how long it 

is valid), please contact your retailer or our contact centre on 0333 207 9710 (UK and 

Northern Ireland) or 01 862 3411 (Republic of Ireland)

This guarantee does not in any way diminish or affect your statutory rights in connection 

with the product. This guarantee is in addition to your statutory rights as a consumer. If 

you have any questions about these rights, please contact the retailer from which you 

purchased the product. In certain circumstances, it is possible that your statutory rights 

may offer additional or higher levels of protection than those offered under the terms of this 

guarantee.

What is covered by this guarantee?

•  Repairs to the product required as a result of faulty materials, defective components or 

manufacturing defects.

•  Functional replacement parts to repair a product.
•  The costs of a Beko Approved Engineer to carry out the repair.

What is not covered?

•  Transit and delivery damage.
•  Cabinet or appearance parts, including but not limited to control knobs, flaps and 

handles.

•  Accessories and/or consumable items including but not limited to ice trays, scrapers, 

cutlery baskets, filters and light bulbs.

•  Repairs necessary as a direct or indirect result of:
  

Accidental damage, misuse or abuse of a product.

  

An attempted repair of a product by anyone other than a Beko Approved Engineer (the 

“Engineer”).

  

Installation or use of a product where such installation or use fails to meet the 

requirements contained in this guarantee or the User Instructions Booklet.

9-

Summary of Contents for BDFS16020W



















































Reviews: