16
/
/52 EN
Preparation
3. Check quality and storing conditions of
your detergent
4. Check water hardness on your region
and make the necessary changes
needed.
5. Clean your detergent cartridge
periodically (every 3 month) to remove
solid or viscous residues inside. These
residues may cause insufficient dosage.
6. Increase the detergent dosage amount
from the settings to improve the
cleaning performance. ‘’
Tablet detergents
Table detergents exhibit water softening
and / or rinse aid effect in addition to
detergent effect. Some types of these
detergents also contain special-purpose
washing chemicals such as glass and
stainless steel protectors.
C
Tablet detergents give satisfying
results only under certain usage
conditions. The best washing
performance in dishwashers is
obtained by using detergent,
rinse aid and water softening
salt individually.
A
C
Place the tablet detergent into
the Tablet Detergent Box found
on the upper basket of the
dishwasher (A).
C
When using tablet detergents,
you can use the Tablet
Detergent Function to improve
the drying performance of the
dishwasher (based on model).
Tablet detergent types commonly found on
the market:
2in1:
Contains detergent, rinse aid or water
softening salt
3in1:
Contains detergent, rinse aid and
water softening salt
4in1:
Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1:
Contains glass and stainless steel
protectors in addition to detergent, rinse aid
and water softening salt
C
When using tablet detergents,
follow the manufacturer's
instructions on the packaging.
C
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using a
tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
4. Make the appropriate rinse aid settings.
