11/EN
•
Green/yellow cable = (E)
(Ground)
»
or
•
Black cable = L1 (Phase 1)
•
Grey cable = L2 (Phase 2)
•
Blue/Brown cable = N (Neutral)
•
Green/yellow cable = (E)
(Ground)
Installing the product
If the oven is below:
*
min.
If the board is below:
It is required to leave a ventilation opening of minimum
180 cm
2
at the rear section of the furniture as
illustrated in the following figure.
*
min.
During installation of your induction hob, place the
product parallel to the installation surface. Also, apply
sealing gasket to the parts of the hob contacting the
counter as described below in order to prevent any
liquid from penetrating between the product and the
counter.
1. Prepare the surface of the counter as shown in
the figure.
2. Turning the hob upside down, place it on a flat
surface.
3. The sealing gasket provided in the package must
be applied on the lower casing bend around the
hob as shown in the figure, during installation of
the hob.
4. Fix the mounting springs inserting and screwing
them through the holes of the bottom case as
shown in the figure.
For some models, your product may come
with the mounting springs already fitted
on it.
The number of mounting springs on your
product varies depending on product
model.
5. Place the hob on the counter and align it.
6. When the hob is placed on the counter top it will
be fixed easily with the help of the clamps. If the
installation with these clamps is not sufficient for
your cooktop, additional 2 mounting clamps can
be fixed to the front side of the product as shown
in the below figure.
Summary of Contents for BCT601IG
Page 1: ...Built In Hob BCT601IG ...