background image

Dryer / User manual

• Electrical products are dangerous for children and pets. Children and 

pets shall not play with the product, climb on or get inside the product.

• Keep the product door closed even when not operated. Children or 

pets could be locked inside the product and suffocate.

• Cleaning and user maintenance operations must not be performed by 

children unless supervised.

• Keep the packaging materials away from children. Risk of injury and 

suffocation.

• Keep all additives used with the product away from children.
• Before disposing of the product, cut the power cord and destroy the 

loading door.

1.3 Electrical Safety

• The product must not be plugged in during installation, maintenance, 

cleaning, repair and transporting operations.

• If the power the cord is damaged, it shall be replaced by authorized 

service to avoid any risk that may occur.

• Do not tuck the power cord under the product or to the rear of the 

product. Do not put heavy items on the power cord. Power cord shall 

not be kinked, pinched and shall not come in contact with any heat 

source.

• Do not use an extension cord, multi-plug or adaptor to operate your 

product.

• The product shall not be powered via an external switch such as a timer 

or shall not be connected to a circuit that is regularly opened and closed 

with a tool.

• The plug shall be easily accessible. If this is not possible, a mechanism 

that meets the electrical legislation and that disconnects all terminals 

from the mains (fuse, switch, main switch, etc.) shall be available on the 

electrical installation.

• Do not touch the plug with wet hands.
• When unplugging the appliance, don’t hold the power cord, but the 

plug.

Summary of Contents for B5T4823RW









































Reviews: