EN / 35
HomeWhiz Application may require
you to type the product number
shown on the product label. You can
find the product label inside of the
appliance door. The product number
is located on this label.
6.15.2 Setting up a Washing Ma-
chine Connected to
Someone Else's Account
If the washing machine that you want to use
has been previously registered to the system
with someone else's account, you need to
establish a new connection between your
HomeWhiz App and the appliance.
a. Download HomeWhiz Application on the
new smart device you want to use.
b. Create a new account and log in to this
account on the HomeWhiz app.
c. Follow the steps described in HomeWhiz
Setup (HomeWhiz Setup) and proceed
with the setup procedure.
Since the HomeWhiz Feature and
Remote Control function on your ap-
pliance is operated via pairing using
Bluetooth technology only one
Homewhiz application can operate it
at a time.
6.15.3 Remote Control Function
and Using It
Bluetooth is automatically turned on after
setting up HomeWhiz. To activate or deac-
tivate the Bluetooth connection, please see
Bluetooth 3’’’.
If you turn off and on your machine while
bluetooth is active, it will automatically re-
connect. In cases such as paired device go-
ing off the range, bluetooth will automatically
turn off. For this reason, you will need to turn
on the bluetooth again if you want to use the
Remote Control function.
You can check the bluetooth symbol on the
display to track your connection status. If the
symbol is continuously on, you have
bluetooth connection. If the symbol is flash-
ing, the product is trying to connect. If the
symbol is off, it means you are not connec-
ted.
If the Bluetooth connection is turned
on in your product, then the Remote
Control function can be selected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection cannot
be established, repeat the initial
setup settings on the appliance.
NOTICE:
For safety reasons, the
product’s door will remain locked
while the Remote Control function is
enabled, independently of the oper-
ating mode. If you want to open the
door of the product, you will need to
turn the programme selection knob
or press the remote control key to
deactivate the remote control func-
tion.
If you want to control your washing machine
remotely, you need to activate the Remote
Control function by pressing the Remote
Control button while the programme knob is
in the Download Programme/Remote Con-
trol position button on the control panel of
your washing machine after closing the front
