background image

HOW TO OBTAIN SERVICE FOR YOUR APPLIANCE 

Please keep your purchase receipt or other proof of purchase details in a safe place; you will need to have this documentation 

available should the product require attention under guarantee. 

Please take a few moments to complete the details below, as you will need this information when you call us, or to use our 

online services. For help please visit beko.co.uk/support/model-finder 

 The product model number is printed on the Operating Instruction Booklet / User guide  

  The product model and serial number is printed on the Rating Label affixed to the appliance. 

  The Retailer (Purchased from) and Date of purchase will be printed on your purchase receipt or other proof of 

purchase paperwork 

Recording of these details alone will not count as proof of purchase. A valid proof of purchase is required for requesting 

service under guarantee.

 

Model number 

Serial number 

Purchased from 

Date of purchase 

 
 

 

 

 

 
For service under guarantee or for product advice please call our Customer Service Team 

Before requesting service please check the troubleshooting guide in the Operating Instructions booklet or 

our video support found beko.co.uk/support/how-to-guides, as a charge may be levied where no fault is 

found, even though your product may still be under guarantee. 

After arranging a service visit please ensure the area around the product must be easily accessible to the Service 

Representative, without the need for cabinets or furniture to be removed or moved. 

It is your responsibility to ensure our Service Representatives have a clean and safe environment to carry 

out any repairs. 

Please have your Model number and Serial number available when you call us, as you will be required to provide it prior to 

booking a service visit 

UK Mainland & Northern Ireland:  
0333 207 9710  

Landline or mobile calls to 0333 numbers cost no more than calls to geographic numbers 01 or 02 and are charged at the 

basic rate. Calls from landlines and mobiles are included in free call packages but please check with your telephone service 

provider for exact call charges. 

Republic of Ireland:  
01 862 3411

  

 

Service once the manufacturers guarantee has expired 

If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee 

agreement document, otherwise please call us using the appropriate number above, where service can be obtained at a 

charge. 

If you do not have any extended guarantee you can call the Customer Services Team for UK customers on 0330 123 1750 

and ROI customers on 01 862 3411 

Contact us though our website 

Send us a secure message through our online contact us form. Please visit our website, click Contact Us and choose a 

product support topic from the list of options. Complete the required details and click send message. 

Product registrations 

For UK registrations please visit beko.co.uk/register and for the Republic of Ireland visit beko.ie/register. 

Summary of Contents for B3T4923D









































Reviews: