Beko ATP5100I, Instruction Manual

Page: 12 / 108

12 / EN Air purifier/ Instruction Manual
8
Change The Hepa Filter
Always unplug the unit before changing the
HEPA filter.
1. When the filter change indicator illuminates in
white, it’s time to change the HEPA filter.
2. Turn off the unit and unplug it.
3. Carefully rotate the body anticlockwise and
remove it from the air inlet grill.
4. Remove the HEPA filter out of the air inlet grill.
5. Remove the pre-filter.
6. Replace a new HEPA filter into the air inlet grill.
7. Put the body onto the air inlet grill, then rotate
the body clockwise until the fastener locks into
the groove.
8. Simultaneously hold and Touch the Power
and Timer buttons for 3 seconds to activate the
filter function.
9
Troubleshooting
Problem Solution
Unit will not operate. Check to make sure the unit is plugged in.
Check to make sure the unit is on.
Check condition of the filter and replace if necessary.
Check to ensure nothing is blocking the air inlet and
filtered air outlet.
Be sure the plastic bag has been removed from the filter.
Decreased air flow.
12 / 108 EN Air purifier/ Instruction Manual