15 / 30EN
Refrigerator / User Guide
Using the product
1. Support Service Key
Press this key for 3 seconds to activate/deactivate
the support service. Detailed information on the
support service is provided in the “Support Service
Feature” section.
2.Quick Freeze Key
When the quick freeze key is pressed, the quick
freeze symbol (
) shall be illuminated and the
quick freeze function shall be activated. Freezing
compartment temperature is set to -27 Celcius.
Press the key again to cancel function. The quick
freezing function shall be automatically cancelled
after 52 hours. To freeze a large amount of fresh
food, press the quick freeze key before placing the
food in the freezer compartment.
*Handle Light Function Setting Key
Handle light function might be switched between
open and closed modes by pressing quick
freezing button (
) for 3 seconds. In the closed
mode, the handle light is only activated when the
appliance door is opened and it goes out after a
while after the door is closed. In the open mode,
the handle light is activated when the appliance
door is opened, the handle light stays on dimly after
a while after the door is closed. The handle light
function is set to the ex-factory closed mode.
3. Fault Condition Indicator
This indicator (
) shall be active when your
refrigerator cannot perform adequate cooling or in
case of any sensor error. “E” shall be displayed on
the Freezing Compartment temperature indicator
and figures such as 1,2,3... shall be displayed on
the cooling compartment temperature indicator.
These figures provide information to the authorized
service on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep the
door open for a long period of time. This is not a
fault, this warning shall be removed when the food
is cooled down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically
and the energy saving symbol () is displayed when
the door of the product is not opened or closed
for some period of time. When the energy saving
function is active, all symbols on the screen
other than the energy saving symbol shall be
turned off. When the energy-saving function is
active, pressing any key or opening the door will
deactivate the energy-saving function and the
display signals will return to normal. The energy-
saving function is a function activated ex-factory
and cannot be cancelled.
5. Freezing Compartment Temperature
Setting Key
Temperature setting is made for cooler
compartment. Pressing this key will enable the
freezer compartment temperature to be set at
-18,-19,-20,-21,-22,-23,-24 Celcius.
6. Compartment Conversion Key
When the compartment conversion key is
pressed for 3 seconds, freezer compartment
switches between cooler, off, and freezer modes
respectively. When it is operated as cooling
compartment, the temperature of the compartment
may be set at 4 Celcius. In case of OFF mode,
compartment temperature indicator shall display
“- -”.
7. Anti-Odour Module Key
Press and hold this button for 3 seconds to
activate/deactivate the anti-odour feature. As the
anti-odour feature is active, the ( ) LED on the
respective button is illuminated. When the feature
is active, the anti-odour module will be operated
periodically.
8. Cooling Compartment Temperature Setting
Key
Allows setting of temperature for cooler
compartment. Pressing this key will enable the
cooling compartment temperature to be set at
8,7,6,5,4,3,2 and 1 Celcius.
9. Cooling Compartment OFF (Vacation)
Function Key
Press the key for 3 seconds to activate the
vacation function. Vacation mode is activated
and the LED on the key is illuminated. “- -”
shall be displayed on the Cooling Compartment
temperature indicator and the cooling
