background image

 8

Dryer / User Manual

2  Your Dryer

2.1 Overview

11

10

1

2

3

4
5

6

7

8

9

  1. Top panel
  2. Control panel
  3. Loading door
  4. Kick plate opening button
  5. Ventilation grids
  6. Adjustable legs
  7. In models where the tank is placed below, 
the water tank is inside the toe board
  8. Type label
  9. Lint filter
10. Water tank drawer (in models where the 
tank is placed above)
11. Power cord

2.2 Package Contents

1. Water 
drain 
hose *

5. Drying 
basket 
user 
manual*

2. Filter 
drawer 
spare 
sponge*

6. Water 
Filling 
Container*

3. User 
Manual

7. Pure 
Water*

4. Drying 
basket*

8. 
Fragrance 
Capsules 
Group*

*Optional - may not be included, depends on 
model.

3 Installation

Before the calling the nearest Authorized 
Service for the installation of the dryer, ensure 
that electrical installation and water drain is 
appropriate referring to the user’s manual

.

 

If they are not suitable, contact a qualified 
electrician and technician to make necessary 
arrangements.

C

NOTE

• 

Preparation of the dryer’s location 
as well as the electrical and waste 
water installations is under customer’s 
responsibility.

A

WARNING!

• 

Prior to installation, visually check if the 
dryer has any defects on it. If the drier 
is damaged, do not have it installed. 
Damaged products cause risks for your 
safety. 

• 

Let your dryer wait for 12 hours before 
starting to use it.

3.1 Appropriate installation location

Install the dryer on a stable and level surface. 
Dryer is heavy. Do not move it by yourself.

• 

Operate your dryer in a well ventilated, 
dust-free environment.

• 

The gap between the dryer and the 
surface should not be reduced by the 
materials such as carpet, wood and tape.

• 

Do not cover the ventilation grills of the 
dryer. 

• 

There must not be a lockable, sliding or 
hinged door that may block the opening 
of the loading door in the place where 
your dryer is to be installed.

• 

Once the dryer is installed, it should stay 
at the same place where its connections 
have been made. When installing the 
dryer, make sure that its rear wall does 
not touch anywhere (tap, socket, etc.). 

• 

Place the dryer at least 1 cm away from 
the edges of other furniture.

• 

Your dryer can be operated at 
temperatures b5°C and +35°C. 
If the operating conditions fall outside 
of this range, operation of the dryer will 
be adversely affected and it can get 
damaged.

Summary of Contents for 7188301360





























Reviews: