background image

DISCLAIMER / WARNING (EN)

Some (simple) failures can be adequately handled by the end-user without any safety issue or 
unsafe use arising, provided that they are carried out within the limits and in accordance with the 
following instructions (see the “Self-Repair” section).

Therefore, unless otherwise authorized in the “Self-Repair” section below, repairs shall be 
addressed to registered professional repairers in order to avoid safety issues. A registered 
professional repairer is a professional repairer that has been granted access to the instructions 
and spare parts list of this product by the manufacturer according to the methods described in 
legislative acts pursuant to Directive 2009/125/EC. 

However, only the service agent (i.e. authorized professional repairers) that you can reach through the phone 
number given in the user manual/warranty card or through your authorized dealer may provide service under the 
guarantee terms. Therefore, please be advised that repairs by professional repairers (who are not authorized by 

Beko

) shall void the guarantee.

Self-Repair

Self-repair can be done by the end-user with regard to the following spare parts: door, door 
hinge and seals, other seals, door locking assembly and plastic peripherals such as detergent 
dispensers (an updated list is also available in 

support.beko.com

 as of 1st of March 2021).

Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair 
shall be done following the instructions in the user manual for self-repair or which are available in 

support.beko.com

. For your safety, unplug the product before attempting any self-repair.

Repair and repair attempts by end-users for parts not included in such list and/or not following the 
instructions in the user manuals for self-repair or which are available in 

support.beko.com

, might 

give raise to safety issues not attributable to 

Beko

, and will void the warranty of the product.

Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs 
falling outside the mentioned list of spare parts, contacting in such cases authorized professional 
repairers or registered professional repairers. On the contrary, such attempts by end-users may 
cause safety issues and damage the product and subsequently cause fire, flood, electrocution 
and serious personal injury to occur.

By way of example, but not limited to, the following repairs must be addressed to authorized 
professional repairers or registered professional repairers: motor, pump assembly, main board, 
motor board, display board, heaters etc.

The manufacturer/seller cannot be held liable in any case where end-users do not comply with the 
above.

The spare part availability of the washing machine or washer-dryer that you purchased is 10 years. 
During this period, original spare parts will be available to operate the washing machine or washer-
dryer properly.

Summary of Contents for 7158144600





























Reviews: