Beko 7080 MultiMode EB, User Manual

Page: 45 / 48

21 / 24 EN
Refrigerator/User Manual
7 Troubleshooting
Check this list before contacting the service. Doing so will save you time and money.
This list includes frequent complaints that are not related to faulty workmanship or
materials. Certain features mentioned herein may not apply to your product.
The refrigerator is not working.
t
The power plug i s not fully settled. >>> Plug i t i n to settle completely i nto the
socket.
t
The fuse connected to the socket power i ng the product or the ma i n fuse i s
blown. >>> Check the fuses.
Condensation on the side wall of the cooler compartment (MULTI ZONE,
COOL, CONTROL and FLEXI ZONE).
t
The door i s opened too frequently >>> Take care not to open the product’s
door too frequently.
t
The env i ronment i s too hum i d. >>> Do not i nstall the product i n hum i d
env i ronments.
t
Foods conta i n i ng l i qu i ds are kept i n unsealed holders. >>> Keep the foods
conta i n i ng l i qu i ds i n sealed holders.
t
The product’s door i s left open. >>> Do not keep the product’s door open for
long per i ods.
t
The thermostat i s set to too low temperature. >>> Set the thermostat to
appropr i ate temperature.
Compressor is not working.
t
In case of sudden power fa i lure or pull i ng the power plug off and putt i ng back
on, the gas pressure i n the product’s cool i ng system i s not balanced, wh i ch
tr i ggers the compressor therm i c safeguard. The product w i ll restart after
approx i mately 6 m i nutes. If the product does not restart after th i s per i od,
contact the serv i ce.
t
Defrost i ng i s act i ve. >>> Th i s i s normal for a fully-automat i c defrost i ng
product. The defrost i ng i s carr i ed out per i od i cally.
t
The product i s not plugged i n. >>> Make sure the power cord i s plugged i n.
t
The temperature sett i ng i s i ncorrect. >>> Select the appropr i ate temperature
sett i ng.
t
The power i s out. >>> The product w i ll cont i nue to operate normally once the
power i s restored.
The refrigerator's operating noise is increasing while in use.
t
The product’s operat i ng performance may vary depend i ng on the amb i ent
temperature var i at i ons. Th i s i s normal and not a malfunct i on.