EN / 44
• Attach 2 plastic wedges on the ventilation
cover as shown in the figure.
Adjusting the stands
If the product is not in a balanced position,
you can adjust the balance of the product by
rotating the stands on the front right or left.
4.1 Electrical Connection
WARNING:
Do not use extension or
multi sockets in power connection.
WARNING:
Damaged power cable
must be replaced by Authorized Ser-
vice.
• Our firm will not assume responsibility for
any damages due to usage without earth-
ing and power connection in compliance
with national regulations.
• The power cable plug must be easily ac-
cessible after installation.
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to en-
hance the cooling system. High
pressure fluid may flow through
these surfaces, and cause hot sur-
faces on the side walls. This is nor-
mal and it does not require servicing.
Be careful when you contact these
areas.
5 Preparation
What to do for energy saving
Read the “Safety Instructions” sec-
tion first.
• This refrigerating appliance is not intended
to be used as a built in appliance.
• Do not keep the refrigerator doors open
for long periods.
• Do not place hot food or beverages into
the refrigerator.
5.1 What To Do For Energy Saving
• Do not overfill the refrigerator; blocking the
internal air flow will reduce cooling capa-
city.
• Depending on the product’s features; de-
frosting frozen foods in the cooler com-
partment will ensure both energy saving
and preserve food quality.
• Food shall be stored using the drawers in
the cooler compartment in order to ensure
energy saving and protect food in better
conditions.
Summary of Contents for 678550EB
Page 28: ...TR 28 Hizmet Talebinin Değerlendirilmesi ...
Page 30: ......
