Using the product
14 /39EN
Refrigerator / User Guide
1.Error status indicator
If your refrigerator does not cool
adequately or if there is a sensor failure,
this indicator
(
) will be activated. When this
indicator is active, Freezer Compartment
Temperature indicator will display "E"
and Fridge Compartment Temperature
Indicator will display numbers such as
"1,2,3…". These numbers on the indicator
provide information about the error to the
service personnel.
When you place hot food into the freezer
compartment or if you leave the door
open for a long time, exclamation mark
can illuminate for some time. This is not a
failure; this warning will disappear when
the food cools down.
2. Energy saving function (display
off) indicator
If the product doors are kept closed for
a long time energy saving function is
automatically activated and energy saving
symbol is illuminated. ( )
When energy saving function is activated,
all symbols on the display other than
energy saving symbol will turn off. When
the energy saving function is activated,
if any button is pressed or the door is
opened, energy saving function will be
canceled and the symbols on display will
return to normal.Energy saving function is
a factory default and cannot be cancelled.
3. Quick fridge key
Quick fridge indicator (
) is lit and
the fridge compartment temperature
indicator value is displayed as 1 when
the quick fridge function is activated.
To cancel this function, press the Quick
fridge button again. Quick fridge indicator
will be off and the refrigerator will be
reset to its normal settings. Quick fridge
function is cancelled automatically in 1
hour if you do not cancel it. If you want to
cool large amounts of fresh food, press
the Quick fridge button before putting the
food into the fridge compartment.
4. Fridge compartment temperature
setting button
When this button is pressed the fridge
compartment temperature can be set to
8,7,6,5,4,3,2 and 1 values. ( )
5.Wireless connection (*optional)
key
A long press on the button (3 seconds)
starts the product’s first introduction to
the home network.
During the connection establishment
process, the wireless network icon (
)
will flash at 0.5 sec intervals.
When the connection to the home
network is successful, the wireless
network icon lights up continuously.
After the first connection has been
established, the connection can be
activated/deactivated by briefly pressing
this button.
After turning the power off and on, it will
automatically remember and establish a
connection to your network.
The wireless network icon will flash briefly
(at 0.2 sec intervals) until the connection
is established.
When the connection is active, the
wireless network icon will light up
continuously.
If the connection cannot be established
for a certain period of time, check your
modem/connection settings.
HomeWhiz application is used as the
connection interface.
The connection steps are described in the
HomeWhiz QUICK INSTALLATION GUIDE
that comes with the product.
See the troubleshooting section for
answers to basic questions.
