L6B SERVICE MENU
1.
Activating the Service Menu
When the menu is on the screen press ‘9’, ‘3’, ’0’, ’1’ on the remote controller. This will
activate the service menu.
2.
Service Menu Structure
The service menu has three items: display, calibre and version
2.1
Display
Display item has seven options:
a-
Panel
Panel option gives information about the current panel resolution. It is a read only
option and can not be set.
b-
Power on time
Power on time gives information about the last update time of the SW running. It
is a read only option and can not be set.
c-
Backlight on time
Backlight on time option reserved.
d-
Scart prescale
Scart prescale option sets the prescale values for the input sounds entering the scart
input of the MSP(Micronas Sound Processor). Changing this value you can adjust
the level of the output sound going to loudspeakers for all the sources except the
Tuners. The range is between 0 and 100.
e-
nicam prescale
Nicam prescale option sets the prescale values for the Nicam standard sounds for
tuner inputs. Changing this value you can adjust the level of the output sound
going to loudspeakers for Nicam sounds entering the analog sound input of MSP.
The range is between 0 and 100.
f-
fm/am prescale
fm/am prescale option sets the prescale values for the FM/AM standard sounds for
tuner inputs. Changing this value you can adjust the level of the output sound
going to loudspeakers for FM/AM sounds entering the analog sound input of MSP.
The range is between 0 and 100.
g-
Agc(Automatic Gain Control) adjust
Agc adjust option sets the input voltage going to IF decoder AGC pin. Changing
this value you can adjust this voltage for optimum Tuner performance. The range
is between 0 and 31.
h-
R/G/B Brightness/Contrast: These are used for color bias adjustment. The range is
Between 0 and 255
