Getting started
Remove your Television carefully from the
box. You may wish to store the packaging
for future use.
In the box
Inside your this package you should have:
• Television
• Remote control
• User guide
• AAA batteries x 2
Read these instructions before use.
A e r i a l c o n n e c t i o n
Plug the aerial lead into the aerial socket
on the rear of the TV.
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
Please note
If you live in a poor reception area or use
an indoor aerial you may experience loss
or corruption of teletext transmissions.
Switching on
Mains power
Connect the TV mains plug into your
domestic mains socket outlet (230 V 50
Hz AC) and switch on.
Please Note
When your TV is not in use disconnect
the plug from the mains power supply.
Press the Standby button to switch
the TV to standby. The standby
indicator will brighten.
Please Note
Do not leave the television on standby
unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
“Tuning the television”.
Battery fitting
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
Press the Power button on the
front of the TV. The standby
indicator will illuminate.
Press the
Program up, Program
down
button or Numeric Buttons
on the remote handset to switch
the TV on.
The standby indicator will dim.
The picture will appear after a few
seconds.
Switch to stand-by
5
