-19-
Helpdesk: 0845 600 4911
3.5.8 Channel List
If you press
OK
button when no menu is open,
Channel
List
menu will be displayed on the screen.
You can see all the channels of the current mode while you
are in the
Channel List
menu, you can select the desired
channel with
Up/Down
buttons and view it by pressing the
OK
button.
CHANNEL LİST
Channel 1
Channel 2
Channel 3
Channel 4
Select
Exit
Signal Information
Channel
23
490 Mhz
Exit
Network
XX Network
Modulation 2X 64XXX X2/3
Quality
60%
Signal Strength 90%
3.6
Signal Information
This menu gives information about Channel,
Network, Modulation, Signal level and quality.
Press
MENU
button to enter this menu.
Select
Channel Setup
menu by pressing
the
Right/Left
movement buttons. Select
Signal Information
tab by pressing the
Down
movement button and confirm with
Right
movement button or
OK
button. Signal
Information menu will be displayed.
Note:
Signal Information menu will be active
only for Digital broadcasts.
3.7
CA Module (Conditional Access)
In this menu, you can check the CA Module settings. If a CI module is inserted for a
channel that has a scrambled broadcast, then a submenu for that module is opened
and the information for that module is updated.
