12
SmartLock
6.4 Select the right set of holes in
the door bracket that match the
screws you removed from your lock.
The SmartLock comes with the door
bracket A attached (see section 1.3.3).
Check which set of holes in the
bracket match the 2 screws (that you
previously unscrewed from your lock).
6.5
Place the backplate together
with the door bracket and the
2 screws (that you previously
unscrewed in step 1) onto the door,
in such a way that the tailpiece
from your door is perfectly aligned
in the center.
Tailpiece
6.6
The correct position of the door
bracket onto the backplate is indicat-
ed by a light protruding ring on the
backplate.
Fasten the screws loosely, so that
you can reposition the backplate if
necessary.
6.7
After making sure that the door
bracket is concentrically aligned with
the backplate, fasten the door
bracket and the backplate by
tightening the screws into place. Do
not overtighten them, or you risk
damaging the door bracket.
