Start (ready) button:
energıses power cırcuıt of the
machıne
Vıce clampıng buton :
clamps
or loosen the cuttıng materıal.
Blade tıghtenıng button:
tıghten the blade.
Chıp conveyor selector
Speed control potmeter :
controls the ınverter
to adjust the turnıng speed of blade
Manual-automatıc select.
Feeding material: it is used to feed forward (1) or backward (2) manuelly, when the bow is on
top (e2 swich pressed). (controls the feeding motor)
Bow pressure tab:
ıt adjust the pressure
whıch bow applıesto the materıal at the cuttıng.
Bow down tab:
the operator
can adjust the bow move-down
speed at cuttıng by thıs tab.
The indicator of manometer must be in the green area (area ii). If the indicator is in one
of the red area, this means that the tension of the blade is not in the acceptable level
and it may cause unwanted results.
Area i :
this shows that the tension of the blade is less than it must be. Adjust the
blade tension.
Area ii :
this shows that the tension of the blade is normal
Area iii :
this shows that the tension of the blade is more than it must be. This may
break the blade. Reduce the tension.
