Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Step 6)
Attach the paint tray to one of the tray mounting bars, using the 2”
carriage bolts. Place washers between the tray and tray support bar on each
bolt to act as a spacer between the tray and the tray support bar (paper will go
through the space provided). Secure each bolt with a washer and wing nut on
the inside of the mounting bar.
Step 7)
Attach the two dowel retainer buttons on the
outside of the legs by passing a brass screw through
each retainer button and into the predrilled screw holes.
The screw head should fit flush into the recessed por-
tion of the retainer button (figure 4).
Step 8)
Slide the paper roll support dowel through the
predrilled dowel hole of one leg, then through the op-
tional paper roll, and finally into the predrilled hole of
the opposite leg (figure 5). To lock paper roll dowel in
place simply turn retainer buttons so they cover the
dowel holes (figure 6).
Step 9)
Pull the paper up between the paint tray and
the paint tray support bar and slide the paper under the
paper guides/cutters (figures 7 & 8).
Please Note:
The art table is made of high-quality natural hard maple. The
table’s top is a white wipe-off marker surface. Be sure to test
markers on a corner to ensure easy erasure before allowing
general use (markers are not all created equal!). Clean the en-
tire surface regularly. Marker stains may be removed with
special white board cleaners. Never use abrasive household
cleaners, which may damage the surface.
Beka Inc., 542 Selby Ave., St. Paul MN 55102 Phone 1-888-999-2352
