background image

10

Folding bikes only…   

A folding bike is designed to fold. A cliché, 

but it’s an important feature of the bike 

that makes it different in use and main-

tained. 

Thanks to the quick release levers, the 

folding procedure is easy, fast and clear. 

Please take some time to inform yourself 

about the do’s and don’ts of this specific 

range of bicycles.

Important features of the beixo folding 

bikes:

• 

Quick release levers and 

 

folding boxes

• 

Adjustable seat post

• 

Adjustable handle bar stem

• 

Foldable pedals

Quick releases (QR)

For quick adjustment or mounting and 

dismantling, your bike is equipped with 

several quick releases.

 

Caution! For the sake of your safety, the 

quick release must be used with extreme

caution. Insufficient tightening of the 

quick release can cause serious accidents. 

Loosening the quick release:  

Swivel the bolt lever 180° so that    

“OPEN” inscription faces outwards.

Turn the rating nut in an anticlockwise 

direction to further loosen the quick 

release device. 

If it can be so easily tightened that the 

bolt lever can be turned with the fingers, 

loosen the bolt lever again and tighten 

the rating nut by turning it around half-

way (in a clockwise direction).

Foldable handle bars

Open the big QR lever on the top. Care-

fully pull out the two ends of the handle 

bar and fold them backwards. Close the 

QR to keep the arms together.

To close the handle bars open the QR, put 

the arms straight and push them inwards. 

Warning:

 Close the QR thoroughly 

before riding the bike. 

Summary of Contents for Compact

















Reviews: