en | 1 | BD 6xx | Short Operation Manual Brake Tester BD 6xx
Beissbarth GmbH
1 691 606 421 | 2010-07-12
Description of Display
1 Brake force scale in [kN]
2 IR
receiver
3 Side slip measuring scale in [mm]
4 Deceleration in %
Driving request
5 Pictogram test devices
6 Brake force difference in %, axle weight,
ovality
7 Pointer brake force left
8 Pointer brake force right
9 Alarm, automatic lamp
10 Rating
scale
11 Red:
Error
12 Yellow:
Warning
13 Green:
OK
14 Operating
lamp
15 Automatic
button
Normal Operation
Move vehicle across
test stand
•
Front axle
•
Rear axle
With weighing system:
Display of axle weight
when sensoring rollers
are pressed down
or
or
Start test stand
Single wheel measuring
•
Left ON
•
Right ON
Axle measuring
•
Automatic button
Red lamp flashes during
roller resistance
measuring
Measuring operation
Switching off criteria
•
Slip monitoring
•
Sensoring rollers top
•
Manual termination
by
STOP button
•
Brake force after
brake testing longer
than 6 seconds at the
level of the roller
resistance
Ovality measuring
•
Brake forces left and
right larger than 500
N
•
The last three
measurements are
saved
or
or
Saving
•
Front axle
•
Rear axle
•
Parking brake
+
or
or
Repeated display
•
Front axle
•
Rear axle
•
Parking brake
Input buttons
+
Saving button
total weight
Saving button axle
weight
or
or
Entry of weight
•
Overwriting of weight
is possible
•
Change also possible
after printout, as long
as no new saving
took place
•
Saving buttons for
total weight and axle
weight exist
Display of current
weight
•
LCD, right pointer
•
1,000 N = 1,000 kg
Printout via printer
box
Standard printer
•
Olivetti DM 109
•
Seikosha SP-2400
LCD display
•
Print message
•
# Nos of printouts
+
Total deceleration
service brake
+
Total deceleration
parking brake
