manualshive.com logo in svg

Beisler 1281/4 Series, Operating Instructions Manual

Share
Download
Beisler 1281/4 Series Operating Instructions Manual Download Page 30

2-4

2.2.2

Connection of air supply

1

2

3

4

5

1. Connect the air pipe (2) to your air system.

2. Open the air supply of your air system.

3. Level the air pressure to 6 bar using the control (1); the air pressure can be

read at the scale (3).

4. Water collected in the water separator (4) can be released by pressing on

the valve (5).

Attention

We recommend to switch off the air supply when the machine is not in duty.
Use the control (1).

2.3

Elektrical installation

Hint

All work at the electrical components of the machine may only be carried by
qualified staff (qualified electrical employee or instructed person according to
IEC 364 and DIN EN 60204-1).

Danger

Parts under electrical current! Without cutting off the power supply, you might
be injured severely. Please obey the security advice given in chapter 1.

Attention

The machine will be destroyed by connecting to a wrong mains voltage!
Check, whether the requirements from chapter ‘Technical data’ meet the
local conditions.

Summary of Contents for 1281/4 Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands