BEING HUMAN BH12, Owner'S Manual, Page: 11 / 21

How to Operate Your e-Cycle
E-Cycle Modes:
•
You can use your e -Cycle in two modes:
o
Pedal-Assist Mode (Only for Model BH27)
o
Throttle Mode
Instructions:
•
Switch on your e-Cycle. The default mode for switching the e-Cycle on is the ‘M’ button on
the LCD/LED.
•
To start the Pedal-Assist Mode, begin pedaling slowing on Pedal- Assist Mode “1”. This is
recommended to avoid accidents and sudden acceleration.
•
To stop press either of the brakes.
•
To start the Throttle M ode, change the mode to ‘0’ from default pedal assist mode ‘1’.
Important: Pedal-A ssistance will not function when Mode “0” has b een set.)
Remember:
•
Pedal-Assist Mode has 5 Modes (1, 2, 3, 4 and 5), with level 1 being the lowest assist level and
Level 5 the highest.
•
To change the Pedal-Assist Mode level , use the ‘+’ and ‘ - ’ buttons.
•
To change from kilometers per hour to miles per hour or the other way around, press
the ‘+’ and ‘ - ’ buttons together for 4-5 seconds. ( The ‘+’ and ‘ - ’ buttons are found on
the Pedal Assist Control Module.)
•
To activate Walking Mode, press the ‘+’ button and hold for as long as you want this
mode. To end the Walking Mode, release the ‘+’ button.
•
To reset the trip odometer, press down on the ‘ - ’ button for about 3 seconds.
*
Please note, the combination of Pedal-Assist Mode and Throttle feature is limited to the BH27
models. The other model only offers the throttle feature.
©
Being
Human
E-Cycle
2017