Page 3
Concept and Battery Charging
Power supply .................................................................................. 4,8 Vdc through the built-in batteries
Type of batteries .............................................................................................. Rechargeable stylus AA
Consumption during printing .................................................................................................... 925 mA
Battery duration
.......................................................................................................... 100 m of paper
Autonomy ........................................................................................................................ 1h 30 min
Paper roll size ............................................................................................................ 57.5 mm ± 1 mm
Paper-out sensors ................................................................................................................. Built in
Print method .......................................................................................................... Thermal 8 dot/mm
Printing mode .................................................................................................... Straight, reverse 90°
Receive buffer ....................................................................................................................... 128 bytes
Flash memory ............................................................................................................................. 32K
Print speed ....................................................................................................................... 40 mm/sec
Functioning temperature ................................................................................................... 0°C ÷ +50°C
Relative humidity ........................................................................................... 10-85% without condensation
Electromagnetic compatibility ........................................................................................................ CE
Size & weight .......................................................................................... 146*88*65 mm - about 370 g
Warranty ............................................................................................................................... 3 years
Battery technical data
Battery pack nominal voltage 4,8 V.
Duration about 1h 30 min. using charged batteries.
On the first turn on
On purchase, the batteries are not completely charged.
We recommend to charge the batteries for max. 6 hours, before using the instrument.
Always use the supplied battery charger. If it becomes faulty obtain and use the genuine original spare part.
Charging the batteries.
1. Connect the battery charger connector to the socket located at the side of the instrument.
2. Connect the battery charger to an electrical outlet. The front red LED will instantly turn on.
While charging, the battery level indicator will show the battery charge status.
Charge time: about 6 hours.
Us e
The batteries should never be exposed to high temperatures, that is, over +60°C.
In order to ensure an optimum service life, use them at environment temperature.
If used at low or high temperatures their service life could diminish.
LED indication
Condition
Solution
ON
Printer ON
Off
Printer OFF
*
No paper
Insert paper
* *
Hot print head
Cool down the print head
* * *
Low battery
Recharge the battery
* * * *
Battery at 20%
Recharge immediately
Blinking every second Quick charging
Technical Specifications
