3
4.Overheating protection and Lack water protection.
5.Easy to replace the disc piezoceramics and clean the piezoceramics.
二
ultrasonic negative ionizing mist maker is technological product,which its integration of aroma
diffuser and air refresher,help to freshen air,and the mist will add air humidity and clear static
electricity,all the things are well for human body.If adding one or two drops of disinfectant or
aroma liquid,not only it can disinfect and sterilize the air,but also make the room full of fragrant
air.
Make sure put the mist maker in water,it can easily be misting. Its wide usage is in different craft
article,rokery garden fountain decoration and beautification range, also in the hotel place,even the
appliance installation of industry humidification.
三
:Operating Instructions
When take out the mist maker from the package(please don’t crash the water level sensor).put it in
the deep 40mm-80mm water.
the best working effect is keeping 30mm to 50mm of water above ceramic disc,If water is too deep,
it can not spray mist, but if water is too shallow, it will stop to spray mist automatically,also when
the water –lever sensor switch is out of water. It will also stop to work.
Pls notice that there are no obstacles within the scope of more than 100mm space of the sprayer
ceramic water level.
2.The Spray indicator light will be bright after connecting the mist maker with power supply,then
the ultrasonic atomizer will work.
If the spray lights flash and the atomizer don’t work, this mean that there was not enough water.
3. As the mist maker normally working, the water in the container will constantly evaporate,when
the water is below the water level sensor,it will automatically be protected and stop misting,at this
time the spray lights will flash. After adding the water above the water level sensor,it continues
misting.
4.At the beginning of the work, the atomization quantity may be small,it will be stable misting and
become large after working sometime.When the winter is coming,the weather will affect the
misting rate,you can put some hot water to speed its stable misting rate.
5.When you don’t use the mist maker for a long time,please make sure pull the transformer/adapter
input lead wires out,which can avoid the accident/ unfortunate happening.
