Copyright © 2019 TTAAll Rights Reserved.
Product Introduction
16
2.3.4 Spraying Tube Installation
First, insert the Φ8 spraying tube into the three-way connector as Figure 14-1. Second, go
through the spraying tube from the tube holder as Figure 14-2. And then insert the other
side of the spraying tube into the one-way connector at the nozzle place as Figure 14-4.
Install the other spraying tube the same way. It will be completed like Figure 14-3.
1
2
3
4
Press here to plug the hose in
and let it go
Figure 14
2.3.5 Intelligent Battery Installation
1) Push the Intelligent battery into the water tank as Figure 15-1, due to interference
fit , it will be installed well when the battery wear pad stuck into the position Mark 3 in the
Figure 15-2. It will be completed like Figure 15-3.
