Operation
Beijer Electronics, MAEN953B
25
4.6 Installation of LAN-/Network Card
To install the LAN-/network card(s) follow the below instructions:
– After installing the operating system and the chip set driver, the system auto-
matically creates a link to a network connection. You will find the relevant
icon (Network icon) in the right hand lower task bar.
– To install the second network card, open the EXE-file from the drive directo-
ry: Drive
E:\Driver\EPC-PM\LAN
.
– Confirm each installation step and re-start the EPC Nautic and EPC Box
Nautic at the end of the installation.
– After the re-start two new network icons appear in the right hand side lower
task bar.
– You can now configure both network cards to your own requirements (IP-
address etc.) via the system control.
– Via the MS-DOS window, under
Start/All Programs/Accessories/
Command prompt
, you can set a “connection PING” to test your connec-
tions to the server and other PC’s.
(for example:
C:\ping 192.168.5.100
).
