background image

 

aware of the potential risks for exposure and can exercise control over their exposure.   

This product is not authorised for general population, consumer or similar use. This transmitter 

must not be co-located or operating in conjunction with any other antenna or transmitter.   

This transmitter must not be co-located or operated in conjunction with any other antenna or 

transmitter.    Your radio should be used in its normal operating position when hand-held, worn on 

the body or secured within a cradle. Always ensure that the antenna is pointed away from the 

body, particularly the eyes. When body-worn, the radio must be secured using a Sepura approved 

attachment. Ensure the antenna is at least 2.5 cm (1 in.) away from the body when   

transmitting. 

Cette radio a été conçue pour un usage professionnel dans un environnement contrôlé, où les 

utilisateurs sont pleinement conscients du danger potentiel de l’exposition à laquelle ils sont 

soumis et peuvent exercer un contrôle sur cette exposition. Ce dispositif radio N’EST PAS 

autorisé pour l’ensemble de la population, les consommateurs en général, ni pour une   

utilisation similaire. Cet émetteur ne doit pas être co-localisés ou   

fonctionner en conjonction avec une autre antenne ou émetteur. 

 

 

 

It’s important that the operator is aware of and understands hazards common 

to the operation of any radio .Please observe the following safety precautions 

to prevent radio damage or personal injury. The following precautions shall be 

observed during operation, service and repair of this radio.

 

The recommended usage rate is 1 minute for TX and 4 minutes for RX, 

when the radio is used for transmission for many hours continuously, the 

This radio is intended for use in occupational/controlled applications where users have been made 

IC radiation exposure statement     

Summary of Contents for BF-TD371




























Reviews: