4. Specifications
Frequency Response
5 Hz to 150 kHz
Noise Level
-92 dBu
THD+N @ 1 kHz / 0 dBu < 0,02%
Input Impedance
10 kOhm
Connectors
RCA, In (L/R) u. Out (L/R)
Signal voltage
max. 4,6 / 15 V rms (Line/Amp)
Connector cables
+12 V (red), GND (black), Remote (green)
5. Warranty
§ 1 WARRANTY CARD
To be protected by this warranty, the buyer must complete and return the enclosed
warranty card (signed/stamped by retail dealer) within 14 days of the date of purchase
to BEHRINGER INTERNATIONAL (address see § 3). Failure to return the
card in due time (date as per postmark) will void any extended warranty
claims.
§ 2 WARRANTY
BEHRINGER INTERNATIONAL warrants the mechanical and electronic com-
ponents of this product to be free of defects in material and workmanship for
a period of one (1) year from the original date of purchase, in accordance with
the warranty regulations described below. If any defects are found in the
materials or workmanship, or if the product fails to function properly within
the specified warranty period, BEHRINGER INTERNATIONAL shall, at its
sole discretion, either repair or replace the product. If the warranty claim
proves to be justified, the product will be returned freight prepaid by
BEHRINGER INTERNATIONAL within Germany. Outside of Germany, the
product will be returned at the buyers expense.
Warranty claims other than those indicated above are expressly excluded.
§ 3 RETURN AUTHORIZATION NUMBER
To obtain warranty service, the buyer must call BEHRINGER INTERNA-
TIONAL during normal business hours BEFORE returning the product (Tel.:
+49 (0) 21 54 / 92 06 66). All inquiries must be accompanied by a description
of the problem. BEHRINGER INTERNATIONAL will then issue a return au-
thorization number. The product must be returned in its original shipping
carton, together with the return authorization number, to the following ad-
dress:
BEHRINGER INTERNATIONAL GmbH
Service Department
Hanns-Martin-Schleyer-Str. 36-38
D - 47877 Willich-Münchheide
Shipments without freight prepaid will not be accepted.
§ 4 WARRANTY REGULATIONS
Warranty services will be furnished only if the product is accompanied by an original
retail dealers invoice. Any product deemed eligible for repair or replacement
by BEHRINGER INTERNATIONAL under the terms of this warranty will be
repaired or replaced within 30 days of receipt of the product at BEHRINGER
INTERNATIONAL. If the product needs to be modified or adapted in order to
comply with applicable technical or safety standards on a national or local
level, in any country which is not the country for which the product was
originally developed and manufactured, this modification/adaptation shall
not be considered a defect in materials or workmanship. The warranty
does not cover any such modification/adaptation, irrespective of whether
it was carried out properly or not. Under the terms of this warranty,
BEHRINGER INTERNATIONAL shall not be held responsible for any cost
resulting from such a modification/adaptation. Free inspections, mainte-
nance/repair work and replacement of parts are expressly excluded from
this warranty, if caused by normal wear of the product.
Damages/defects caused by the following conditions are not covered by
this warranty:
s
misuse, neglect or failure to operate the unit in compliance with
the instructions given in the user or service manuals.
s
connection or operation of the unit in any way that does not
comply with the technical or safety regulations applicable in the country
where the product is used.
s
damages/defects that are caused by force majeure or by any
other condition beyond the control of BEHRINGER INTERNATIONAL.
Any repair carried out by unauthorized personnel will void the warranty. Products
which do not meet the terms of this warranty will be repaired exclusively at the
buyers expense. BEHRINGER INTERNATIONAL will inform the buyer of
any such circumstance. If the buyer fails to submit a written repair order
within 4 weeks after notification, BEHRINGER INTERNATIONALH will
return the unit C.O.D. with a separate invoice for freight and packing.
Such cost will also be invoiced separately when the buyer has sent in a
written repair order.
§ 5 WARRANTY TRANSFERABILITY
This warranty is extended exclusively to the original buyer (customer of retail
dealer) and is not transferable to anyone who may subsequently purchase this
product. No other person (retail dealer, etc.) shall be entitled to give any warranty
promise on behalf of BEHRINGER INTERNATIONAL.
§ 6 CLAIM FOR DAMAGES
Failure of BEHRINGER INTERNATIONALH to provide proper warranty
service shall not entitle the buyer to claim (consequential) damages. In no
event shall the liability of BEHRINGER INTERNATIONAL exceed the
invoiced value of the product.
§ 7 OTHER WARRANTY RIGHTS
This warranty does not exclude or limit the buyers statutory rights provided by
national law, in particular, any such rights against the seller that arise from
a legally effective purchase contract.
Operating Voltage
11 V DC to 14,4 V DC
Fuse type
160 mA, slow-blow
Dimensions
170 mm x 114 mm x 36 mm
Weight
ca. 700 g
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or shown.
8
9
10
11
Fig. 3: Rear panel control elements
8
Use the RCA-type INPUTS to connect the cable coming from the car radio or preamp output.
9
The ATTENUATOR switch determines the input sensitivity of the ULTRAFEX CAR. When your car radio pro-
vides a line-level signal (e.g. for connection to a power amp), the sensitivity should be set to LINE LEVEL.
When you wish to connect the speaker outputs of your car radio to the inputs of the ULTRAFEX CAR, set this
switch to FROM AMPLIFIER, so as to avoid damage to the input stage of the ULTRAFEX CAR.
10
The RCA-type OUTPUTS on the ULTRAFEX CAR are connected to the inputs of your power amp.
11
Use this cable to supply the unit with power. Connect the red cable to +12 V and the black cable to mass (-).
Please note the instructions given above. The green cable can be seen as the ULTRAFEX CARs power switch.
As soon as a +12 V voltage is applied to this cable the unit is activated. So, when you connect the green cable
to the antenna control output of your car radio, the ULTRAFEX CAR will be switched on together with your radio.
Your power amp will certainly have a similar connector, so that you can connect both devices to the car radio.
All manuals and user guides at all-guides.com
