ULTRA PHASE SHIFTER UP300
Thank you for showing your confidence in us by purchasing the BEHRINGER
ULTRA PHASE SHIFTER UP300. This high-quality effects pedal is designed for all musicians
yearning for a way to pep up their sound. Thanks to its high-performance features you
can create phase shifting effects modeled after two of the most legendary pedals.
With the phaser, a second, phase-shifted signal is added to the original audio signal. The
result is thicker and enhanced sound. This effect is often used for guitar sounds and
keyboards. In the 70s, it was also extensively used for other instruments like electric pianos.
1. CONTROLS
Top view
The
MODE
switch lets you choose between negative feedback (Mode 1) or positive
feedback (Mode 2) phaser modes. Negative feedback means that the delayed
signal is inverted before it is fed back to the original signal. In positive feedback
mode the delayed signal is not inverted. In this case the effect has a more detuned
character perfect for vibrato effects.
The
LEVEL
control adjusts the output level.
The
RATE
control determines the speed of the phase shifting effect.
Turn up the
DEPTH
control to achieve a fuller, deeper effect sound.
The
RES(onance)
control determines the amount of output signal fed back to the
phaser input to increase the effect intensity.
This blue
ON/BATT
LED illuminates when the effect is activated. It also serves as
a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this ¼" TS
IN
connector to plug in the instrument cable.
The ¼" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection at the front of the unit to plug in 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover.
