Behringer U-CONTROL UMX490 User Manual Download Page 3

3

U-CONTROL UMX490/UMX610 User Manual

behringer.com

Terminals marked with this symbol carry 

electrical current of suffi  cient magnitude to 
constitute risk of electric shock. Use only 

high-quality commercially-available speaker cables with 
¼" TS plugs pre-installed. All other installation or 
modifi cation should be performed only by 
qualifi ed personnel.

This symbol, wherever it appears, alerts you 

to the presence of uninsulated dangerous 
voltage inside the enclosure - voltage that 

may be suffi  cient to constitute a risk of shock.

This symbol, wherever it appears, alerts you 

to important operating and maintenance 
instructions in the accompanying literature. 

Please read the manual.

Caution

To reduce the risk of electric shock, do not 
remove the top cover (or the rear section). 

No user serviceable parts inside. Refer servicing to 
qualifi ed personnel.

Caution

To reduce the risk of fi re or electric shock, 
do not expose this appliance to rain and 

moisture. The apparatus shall not be exposed to dripping 
or splashing liquids and no objects fi lled with liquids, such 
as vases, shall be placed on the apparatus.

Caution

These service instructions are for use 
by qualifi ed service personnel only. 

To reduce the risk of electric shock do not perform any 
servicing other than that contained in the operation 
instructions. Repairs have to be performed by qualifi ed 
service personnel.

Read these instructions.

1. 

Keep these instructions.

2. 

Heed all warnings.

3. 

Follow all instructions.

4. 

Do not use this apparatus near water.

5. 

Clean only with dry cloth.

6. 

Do not block any ventilation openings. Install in 

7. 

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as 

8. 

radiators, heat registers, stoves, or other apparatus 
(including amplifi ers) that produce heat.

Do not defeat the safety purpose of the polarized 

9. 

or grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding-type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If the 
provided plug does not fi t into your outlet, consult an 
electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or 

10.  

pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

Use only attachments/accessories specifi ed by 

11.  

the manufacturer.

Use only with the 

12.  

cart, stand, tripod, bracket, 
or table specifi ed by the 
manufacturer, or sold with 
the apparatus. When a cart 
is used, use caution when 
moving the cart/apparatus 
combination to avoid 

injury from tip-over.

Unplug this apparatus during lightning storms or 

13.  

when unused for long periods of time. 

Refer all servicing to qualifi ed service personnel. 

14.  

Servicing is required when the apparatus has been 
damaged in any way, such as power supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has 
been dropped.

The apparatus shall be connected to a MAINS socket 

15.  

outlet with a protective earthing connection.

Where the MAINS plug or an appliance coupler is 

16.  

used as the disconnect device, the disconnect device shall 
remain readily operable.

Technical specifi cations and appearance are subject to change without 
notice. The information contained herein is correct at the time of printing. 
All trademarks are the property of their respective owners. MUSIC Group 
accepts no liability for any loss which may be suff ered by any person 
who relies either wholly or in part upon any description, photograph or 
statement contained herein. Colors and specifi cations may vary slightly from 
product. BEHRINGER products are sold through authorized dealers only. 
Distributors and dealers are not agents of MUSIC Group and have absolutely 
no authority to bind MUSIC Group by any express or implied undertaking 
or representation. This manual is copyrighted. No part of this manual may 
be reproduced or transmitted in any form or by any means, electronic or 
mechanical, including photocopying and recording of any kind, for any 
purpose, without the express written permission of Red Chip Company Ltd.

ALL RIGHTS RESERVED. 
© 2010 Red Chip Company Ltd. 
Trident Chambers, Wickhams Cay, P.O. Box 146,
Road Town, Tortola, British Virgin Islands

Warranty

§ 1 

This limited warranty is valid only if you purchased 

[1] 

the product from a BEHRINGER authorized dealer in the 
country of purchase. A list of authorized dealers can be 
found on BEHRINGER’s website behringer. com under 
“Where to Buy“, or you can contact the BEHRINGER offi  ce 
closest to you.

MUSIC Group* warrants the mechanical and 

[2] 

electronic components of this product to be free of defects 
in material and workmanship if used under normal 
operating conditions for a period of one (1) year from 
the original date of purchase (see the Limited Warranty 
terms in § 4 below), unless a longer minimum warranty 
period is mandated by applicable local laws. If the product 
shows any defects within the specifi ed warranty period 
and that defect is not excluded under § 4, MUSIC Group 
shall, at its discretion, either replace or repair the product 
using suitable new or reconditioned product or parts. 
In case MUSIC Group decides to replace the entire product, 
this limited warranty shall apply to the replacement 
product for the remaining initial warranty period, i.e., 
one (1) year (or otherwise applicable minimum warranty 
period) from the date of purchase of the original product.

Upon validation of the warranty claim, the repaired 

[3] 

or replacement product will be returned to the user freight 
prepaid by MUSIC Group. 

Warranty claims other than those indicated above 

[4] 

are expressly excluded. 
PLEASE RETAIN YOUR SALES RECEIPT. IT IS YOUR PROOF 
OF PURCHASE COVERING YOUR LIMITED WARRANTY. 
THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF 
OF PURCHASE.

Online registration

§ 2 

Please do remember to register your new BEHRINGER 
equipment right after your purchase at behringer. com 
under “Support” and kindly read the terms and conditions 
of our limited warranty carefully. Registering your 
purchase and equipment with us helps us process 
your repair claims quicker and more effi  ciently. 
Thank you for your cooperation! 

Return materials authorization

§ 3 

To obtain warranty service, please contact the 

[1] 

retailer from whom the equipment was purchased. 
Should your BEHRINGER dealer not be located in your 
vicinity, you may contact the BEHRINGER distributor for 
your country listed under “Support” at behringer. com. 
If your country is not listed, please check if your problem 
can be dealt with by our “Online Support” which may 
also be found under “Support” at behringer. com. 
Alternatively, please submit an online warranty claim at 
behringer. com BEFORE returning the product. All inquiries 
must be accompanied by a description of the problem 
and the serial number of the product. After verifying 
the product’s warranty eligibility with the original sales 
receipt, MUSIC Group will then issue a Return Materials 
Authorization (“RMA”) number. 

Legal Disclaimer

Limited Warranty

Important Safety 

Instructions

Important Safety 

Instructions

Legal Disclaimer

Limited Warranty

Summary of Contents for U-CONTROL UMX490

















Reviews: