Behringer U-CONTROL UCA222, User Manual

Page: 26 / 95

26
U-CONTROL UCA222 User Manual
5. Basic Operation
The UCA222 provides an easy interface between your
computer, mixer and monitoring system. Follow these steps for
basic operation:
1) Connect the UCA222 to the computer by plugging the
USB cable into a free USB port. The power LED will light
automatically.
2) Connect the audio source that is to be recorded, such as a
mixer, preamp, etc. to the INPUT stereo RCA jacks.
3) Plug a pair of headphones into the 1/8" PHONES jack and
adjust the volume with the adjacent control. You may
also monitor the output by plugging a pair of powered
speakers into the OUTPUT stereo RCA jacks.
4) You may also send the stereo signal in digital audio format
(S/PDIF) to an external recording device via the OPTICAL
OUTPUT using a Toslink fiber optic cable.
6. Application Diagrams
Using a mixer to record in a
studio environment:
The most common application for the UCA222 is doing studio
recording with a mixer. This will allow you to record several
sources at once, listen to the playback, and record more tracks
in sync with the original take(s).
RCA Outputs RCA Input
Computer USB
B3031A
Active Monitor Speakers
XENYX 2222FX
HPM1000