Ultra-Low Latency 2 In/2 Out USB
Audio Interface with Digital Output
Ultra-flexible audio interface
connects your instruments, mixer,
etc. with your computer for
recording and playback
Massive software bundle
including Audacity audio editor,
comprehensive podcasting software
and over 150 virtual instruments and
effect plug-ins downloadable at
behringer.com
Works with your PC or Mac
computer—no setup or
drivers required
High-resolution 48 kHz converters
for high-end audio quality
Stereo Headphone output with
dedicated Level control lets you
monitor both input and output
Additional S/PDIF optical output for
direct digital conversion
Powered via USB—no external
power supply needed
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
The Fastest Way to Upgrade Your Mixer
Looking for a simple, affordable
way to get your music into the digital
realm? Or maybe you’d like to connect
your computer to an external effects
unit or recorder? Want to transfer your
old cassette tapes to CD before the oxide
falls off the tape? The fastest, easiest way
to get analog audio into your computer
is with the U-CONTROL UCA222
Audio Interface.
PC and Mac Ready
This ultra-compact, USB-powered
device lets you connect your PC or
Mac computer to virtually any piece of
audio gear. It gets its power from your
computer’s USB bus, so no external power
supply or batteries are required. And the
UCA222 requires no special setup or
drivers—just plug it in to a free USB port
and start recording.
Versatility
The UCA222 features two analog
mono inputs for connecting any line-level
device, such as a mixer or tape deck, and
two analog mono outputs for connecting
active speakers or studio monitors. On the
digital side, the UCA222 provides USB
connectivity and an additional S/PDIF
optical output for direct analog-to-digital
conversion. The stereo headphone output
has a dedicated level control and allows
you listen to either the input source or the
computer output.
Imagine the Possibilities…
When used as a professional interface
between a mixing console and your
computer, myriad options become available.
Some of these might include connecting
the UCA222’s RCA outputs to the TAPE
INPUT jacks of your mixer or active monitors,
or directly into the input channels of the
mixer. Connecting to mixer input channels
gives you access to equalization and allows
you to use the AUX Send features of your
mixer to build extremely versatile monitor
mixes for your recording sessions.
Continued on next page
U-CONTROL
UCA222
Computer Audio Interfaces
